Filter
Top Products
3.5.2 Communication Parameters
Press 9 3 FUNCT to display the following Communication Parameters or press 9 0 0 FUNCT
to print them on a previously inserted document. Changes may be made as described in 3.5.
Default settings are indicated in bold.
DISPLAY REMARKS
PROTOCOL = DTR,
XON/XOF or PARALLEL
INTRF.
Select the protocol to match your system configuration (See
3.11.2). Select PARALLEL if the parallel interface option is
installed and skip the next four items.
BAUD RATE = XXXX
Select 1200, 2400, 4800, 9600, 19200 or 38400 baud.
WORD LENGTH = 7 or 8
Select 7 or 8 bits/word.
PARITY = XXXX
Select EVEN, ODD or NO parity bit.
STOP BITS = 1 or 2
Select 1 or 2 stop bits.
INPUT BUFFER SINGLE
LINE or MULTIPLE LINE
Select a SINGLE LINE or a MULTIPLE LINE buffer of
11Kbytes.
EMULATION MODE = C, I ,
EF4565 or EF4600/EFP95
(EF emulation on DP9 only)
Select C to enable commands used with previous versions of
this printer. Other selections enable commands compatible with
popular PC based financial printers.
AUTO CARRIAGE RETURN
ON FEED = Y or N
Select Y unless compatibility with software written for another
printer is needed.
DUAL PORT = Y or N
DP9 Only. Select Y unless software cannot accept ports
alternating between enabled and disabled. If N is selected,
connect to either port but not both.
PAPER OUT = NO DOC or
NEVER
Select NO DOC for the parallel interface to indicate paper empty
whenever no document is in the printer or NEVER to never
indicate paper empty.
SELECT = DOC PRES or
ALWAYS
Select DOC PRES for the parallel interface to indicate off-line
whenever no document is in the printer or ALWAYS to always
indicate on-line.
3.5.3 Override Parameters
Press 9 9 FUNCT to display the following Override Parameters. Only trained personnel should
make changes.
DISPLAY REMARKS
LOCKED or UNLOCKED LOCKED allows parameters to be displayed but not changed.
UNLOCKED allows parameters to be changed with the A↑
key.
COVER OVERRIDE OFF
or ON
OFF requires the cabinet to be closed for printing to occur. ON
allows trained personnel to print with the cabinet open.
Closing the cabinet automatically sets the override OFF.
7