Filter
Top Products
Installing Hardware 1-8
Step 3: Install the
Joystick/MIDI
bracket
1. If you are installing a joystick or MIDI device (optional), secure the Joystick/MIDI bracket* to the slot
next to the Sound Blaster Audigy 2 card with the second screw.
2. Connect the Joystick/MIDI cable* to the Joystick/MIDI connector on the Sound Blaster Audigy 2 card
as shown in Figure 1-5.
You may also connect all the
cables to the Sound Blaster
Audigy 2 card first before
securing the card and Joystick/
MIDI bracket in place.
*Available with some models of
the Sound Blaster Audigy 2
card.
Do not force any cable into a
connector. This can cause
permanent damage to your
hardware.
Figure 1-5: Securing the audio card to the expansion slot.
Joystick/MIDI bracket
Joystick/MIDI cable