Filter
Top Products
58
Error/ Warning LED Panel
LED # LED Color/ Status Description Action Required
LED # 1
Communication
RED/ Steady Low power indication: Charge battery
(#1) GREEN/ Flashing
(#3) RED/ Flashing
Printer is in RS232 or USB
mode and Printer Buffer is not
empty.
Press Feed to clear error. Cycling printer
power will result in printer buffer data loss.
LED # 1
&
LED # 3
(#1) BLUE-GREEN
Flashing*
(#3) RED/ Flashing
Printer is in Bluetooth mode
and Printer Buffer is not empty.
Press Feed to clear error. Cycling printer
power will result in printer buffer data loss.
GREEN
Momentary flashing
RED Flashing
Printer has discovered and is
parked on the Q-Mark
Advance Q-Mark to tear bar level to continue
(refer to manual for Q-Mark commands)
RED
Flashing
Paper Error/
Paper Door Open/
Dip Switch 5 and 7 are ON
Insert paper properly (refer to User’s Guide)/
Close paper door to clear error/
Place printer in correct mode
RED
Steady
Print Error: Printer out of paper Replace roll of paper
LED # 3
Magnetic Card
Reader
&
Printer Error
RED
Flash Fast
Print head is hot. Printer will
stop printing
Allow print head to cool off: restart print
temperature recommended is 75
o
C
Blue
Flashing
Firmware upload via serial
cable is completed successfully
Cycle printer power to continue