Filter
Top Products
E-3202 Printer 5
3.0 Introduction
This chapter explains how to connect your printer and load media.
3.1 Connecting the Printer
Connect the communication cable’s RJ12 connector to the printer and the
other end to the host. Connect the one end of the power supply to the
back of the printer and the other end to a properly grounded outlet. Once
the power supply has been connected the printer will automatically
power up.
Warning: DO NOT connect this printer to any type of telephone line or
telephone equipment. See Appendix C for more information.
Note: Contact your dealer for special cables to connect your Palm
OS handheld device to the E-3202, (see Section 6).
Host
Printer
AC Outlet