Filter
Top Products
E-3202 Printer 25
Contrast by 5%
The printer keeps the contrast selected in the preceding menu in
memory and offers you the choice to modify it by steps of 5 % :
example if you have chosen +40 in the precedent menu, the choice
will be +55% +50% +45% +40% –35% – 30% -25%
To skip push NO. When the selected choice is displayed push YES.
Once the desired parameters have been selected:
Ø Push ‘YES’ to save the changes and exit from the setting menu.
Ø Push ‘NO’ to exit without saving.
All new parameter settings will be saved until a new change has been
made. The new settings will be retained even if the printer is turned
OFF.
4.7 Download
Your printer is equipped with a flash memory. The software loaded in
the flash memory can be updated by a downloading procedure. While
downloading your printer indicators will alternatively blink and at the
end of the operation the printer will automatically switch to OFF.
As you may change your software using the downloading procedure,
each time you switch your printer on, the software will be verified. If the
software is not operational for any reason, your printer will turn to
download mode (indicators alternatively blinking) waiting for new
software.
Software flash download is only available through Datamax Technical
Support at (407) 523-5550. Datamax Technical Support will determine
if this procedure is necessary.