DCS dCS 974 Computer Hardware User Manual


 
dCS 974 User Manual Manual for Software Version 1.0x
dCS Ltd May 2001
Manual part no: DOC1241121A1
Page 17
Document No: OS-MA-A0124-112.1A1
Contact
dCS
on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
Setting the Output mode
do this: Scroll down the Sample Rate Conversion menu to Output Mode and press
the
button. The cursor should be beside Normal Choose one of the settings
from the following list, scroll to it and press Set:
Normal. The Output Sample Rate must not be higher than 96kS/s. Single
wire data will be available on all of the AES, SPDIF or SDIF-2 outputs.
Dual AES. The Output Sample Rate must be 88.2, 96, 176.4 or 192kS/s.
Dual AES data will be available on the AES 1 / AES 2 output pair and the
AES 3 / AES 4 output pair. Do not use the other outputs.
Quad AES. The Output Sample Rate must be 176.4 or 192kS/s. Quad
AES data will be available on the AES 1, AES 2, AES 3 and AES 4 output
group. Do not use the other outputs.
DSD SDIF-2. The input format must be DSD, DSD Quad or PCM at
44.1kS/s or more. DSD SDIF-2 data will be available from the DSD/SDIF
outputs (lower block) and DSD Quad data from the AES 1, AES 2, AES 3
and AES 4 output group. Do not use the other outputs.
DSD SDIF-3. The input format must be DSD, DSD Quad or PCM at
44.1kS/s or more. DSD SDIF-2 data will be available from the DSD/SDIF
outputs (lower block) and DSD Quad data from the AES 1, AES 2, AES 3
and AES 4 output group. Do not use the other outputs.
do this: Proceed to Step 4.