Filter
Top Products
dCS 974 User Manual Manual for Software Version 1.0x
dCS Ltd May 2001
Manual part no: DOC1241121A1
Page 51
Document No: OS-MA-A0124-112.1A1
Contact
dCS
on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
To display a parameter that is not marked, first check that no more than four
parameters in the list are marked. If so, select the extra parameter and press
Set - an
x
sign will appear in the box next to it.
If five parameters are already marked, select an unwanted one and press Set;
the x
sign will disappear. Then select the wanted parameter and press Set.
The parameters available are:
Input Audio input selection
Sync Synchronisation source
O/P Mode Output mode
W Length Word Length
N Shape Noise Shaping characteristic applied
Dither Displays Dither type used
L/R Flip
Filter Displays Filter Cut used
With the top five parameters selected, the Status screen might look like this:
With the bottom four parameters selected, the Status screen might look like
this: