70 Removing and Installing Parts
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
1
Follow the procedures in "Before You Begin" on page 47.
2
Release and remove the front panel (see page 62).
NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page 71.
Removing a Floppy Drive
1
Disconnect the power and data cables from the back of the floppy drive and from the system board
(see page 54).
power cable
data cable