Filter
Top Products
Removing and Installing Parts 75
11
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
12
Enter system setup (see page 82) and select the appropriate
Drive
option.
13
Verify that your computer works correctly by running Dell Diagnostics (see page 38).
Adding a Second CD or DVD Drive
1
Ensure that the jumper setting on the new drive is set for "cable select" (see the documentation that
came with the drive for information).
2
Remove two extra alignment screws, shown in the illustration on page 75, from the front of the
computer and insert them into the drive.
NOTE: Some computers come with only two extra alignment screws; others come with four. You only need two
alignment screws for this procedure.
3
Gently slide the drive into place in the drive bay.
drive
alignment screws (2)