Filter
Top Products
11. Close the display and turn the computer over.
12. Replace the two M2.5 x 8-mm screws on the bottom of the computer.
13. Connect the Mini-Card antenna cables (see Wireless Mini Cards).
14. Replace the Mini Card compartment cover and tighten the screws.
Display Bezel
Removing the Display Bezel
1. Follow the instructions in Before You Begin.
2. Remove the hinge cover (see Removing the Hinge Cover).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove the display assembly (see Removing the Display Assembly).
5. Remove the four rubber display bumpers and two mylar screw covers from around the display bezel.
6. Remove the six M2.5 x 4.2-mm shoulder screws from around the display bezel.
7. Starting at the top corner of the display panel, use your fingers to separate the bezel from the top cover, then lift the inside edges to separate the
remainder of the bezel.
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1
rubber display bumpers (4)
2
M2.5 x 4.2-mm screws (6)
3
mylar screw covers (2)
4
display bezel
NOTICE: Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel.