Filter
Top Products
38 Using the System Setup Program
Integrated Devices Screen
Table 2-4 lists the options and descriptions for the information fields that appear on the Integrated
Devices screen.
Table 2-4. Integrated Devices Screen Options
Option Description
Integrated SAS Controller
(Enabled default)
Enables or disables the integrated SAS controller.
Embedded SATA
Controller
(Off default)
Allows the integrated SATA controller to be set to Off or ATA mode.
IDE CD-ROM Controller
(Auto default)
Enables the integrated IDE controller. When set to
Auto
, each channel of the
integrated IDE controller is enabled if IDE devices are attached to the channel and
an external IDE controller is not detected.
NOTE: This CD-ROM option will not appear on this menu screen if your system does
not include this optional device.
User-Accessible USB Ports
(All Ports On default)
Enables or disables the system's user-accessible ports. Options are All Ports On,
Only Back Ports On, or All Ports Off. Disabling the USB ports makes system
resources available for other devices.
Embedded Gb NIC1
(Enabled with PXE
default)
Enables or disables the system's integrated NIC1. Options are Enabled without
PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot
from the network. Changes take effect after the system reboots.
MAC Address Displays the MAC address for NIC1. This field does not have user-selectable
settings.
TOE Capability Displays the TCP/IP Offload Engine (TOE) feature status of NIC1.
Embedded Gb NIC2
(Enabled without PXE
default)
Enables or disables the system's integrated NIC2. Options are Enabled without
PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot
from the network. Changes take effect after the system reboots.
MAC Address Displays the MAC address for NIC2. This field does not have user-selectable
settings.
TOE Capability Displays the TCP/IP Offload Engine (TOE) feature status of NIC2.