Filter
Top Products
Installing System Components 51
Figure 3-4. Removing and Installing a Cooling Fan
Replacing a Cooling Fan Module
NOTE: The procedure for installing each individual fan is the same.
1
Ensure that the fan handle is upright and lower the fan into its retention base until the fan is fully
seated. Then lower the fan handle until it snaps into place. See Figure 3-4.
2
Attach the fan module connectors.
3
If you removed the memory cooling shroud to access the fan modules, replace the shroud. See
"Replacing the Memory Cooling Shroud" on page 54.
4
Close the system. See "Opening and Closing the System" on page 48.
1 cooling fan modules (4) 2 fan module handles 3 module wire harness
4 cooling fan module connector 5 system board cooling shroud
2
1
3
4
5