Filter
Top Products
Removing and Installing Parts 91
6
To install a new modem cable and external modem connector:
a
Attach the modem cable to the external modem connector.
a
Align the external connector with the slot on the back on the computer.
b
Replace the screw that secures the external modem connector in place.
c
Carefully route the cable wire and re-connect the modem cable to the modem.
7
Replace the computer cover (see page 93).
Battery
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer’s electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
A coin-cell battery maintains computer configuration, date, and time information. The battery can
last several years. If you have to repeatedly reset time and date information after turning on the
computer, replace the battery.
screw
(from the back of
the computer)
external modem
connector