Filter
Top Products
Maintenance | 57
3. Grasp the handles on the toner cartridge and pull to remove the
cartridge from the printer.
4. Press the green release handle to release the paper transfer belt.
Holding the handle on the paper transfer belt, lift it out of the printer.
5. With a dry lint-free cloth, wipe away any dust and spilled toner from the
toner cartridges area and their cavities.
6. Locate the long strip of glass (LSU) inside the cartridge compartment,
and gently swab the glass to see if dirt turns the white cotten black.
7. Reinstall all the compartments into the printer, and close the front cover.
8. Plug in the power cord and turn the printer on.
When you open the front cover, be careful not to touch the
underneath of the control panel (the lower part of the fuser unit). The
temperature of the fuser unit might be high and could damage your
skin.
When you open the front cover and work inside the printer, it is highly
recommend that you remove the paper transfer belt first. Because the
work you do could contaminate the paper transfer belt.
If toner gets on your clothing, wipe it off with a dry cloth and wash
it in cold water. Hot water sets toner into fabric.
If the front cover is not completely closed, the printer will not operate.