Filter
Top Products
Diagnostic aids 3-1
3. Diagnostic aids
Accessing service menus
There are two different test menus that can be accessed during POR to identify problems with the printer.
Printing menus
To print a listing of the states and settings of the printer:
1. At the Ready prompt, press under Menu until Utilities appears.
2. Press .
3. Press until Print Menus appears.
4. Press .
Configuration Menu 1. Turn off the printer.
2. Press and hold and .
3. Turn on the printer.
4. Release the buttons when Performing Self
Test displays.
5. The message CONFIG MENU displays on the
top line of the operator panel.
The Configuration menu group contains a set
of menus, settings, and operations which are
infrequently required by a user. Generally, the
options made available in this menu group are
used to configure a printer for operation.
See “Available menus” on page 3-2.
Diagnostics Mode 1. Turn off the printer.
2. Press and hold and .
3. Turn on the printer.
4. Release the buttons when Performing Self
Test displays.
The Diagnostic menu group contains the
settings and operations used while
manufacturing and servicing the printer.
See “Menus may vary depending on the
features and options of the printer.” on
page 3-5.