Dell 2350D/DN Printer User Manual


 
From this
menu:
You can:
Recycled
Bond
Letterhead
Preprinted
Colored
Paper
Light
Paper
Heavy
Paper
Custom
Type <x>
(where x
represents
1–6)
Determine whether 2-sided printing occurs for all jobs specifying a print
media type.
Duplex
Off*
*Factory default setting
Universal Setup
From
this
menu:
You can:
Units of
Measure
Specify the height, width, and feed direction of the Universal Paper Size.
Inches* (US)
Millimeters* (non-US)
Portrait
Width
Set the portrait width of the universal media.
3–14.17 inches
76–1219 mm
NOTE: If the width exceeds the maximum, then the printer uses the
maximum width allowed.
NOTE: 8.5 inches is the US factory default setting. Inches can be
increased in 0.01-inch increments.
NOTE: 216 mm is the international factory default setting. Millimeters
can be increased in 1-mm increments.
Portrait
Height
Set the portrait height of the universal media.
3–14.17 inches
76–1219 mm
*Factory default setting