Filter
Top Products
About Your System 19
Back-Panel Features and Indicators
Figure 1-4. Back-Panel Features
Steady green/Blinks green Drive is present or in idle stage
Steady amber/Off Drive failed
Steady amber/Steady green Drive rebuilding
Item Indicator, Button, or
Connector
Icon Description
1 Power supply 650 W
2 Power LED Lights green when the power supply is
functioning properly.
3 Fault LED Displays status/errors and is controlled
by BMC.
4 System identification
indicator
Both the systems management software
and the identification buttons located
on the front can cause the indicator to
flash blue to identify a particular
system and system board.
Lights amber when the system needs
attention due to a problem.
5 Serial connector Connects a serial device to the system.
6 Video connector Connects a VGA display to the system.
Table 1-2. Hard Drive Indicators—SAS/SATA Add-on Cards
(continued)
Drive-Activity Indicator/Drive-Status Indicator Condition
1
45
6
78
9
3
2
10
book.book Page 19 Tuesday, February 26, 2013 11:33 AM