Filter
Top Products
52 Installing System Components
Figure 3-2. Removing or Installing a Hard-Drive Blank
Installing a Hard-Drive Blank
Align the hard-drive blank with the drive bay and insert the blank into the
hard-drive bay until the release lever clicks into place.
See Figure 3-2.
Removing a Hard Drive From a Hard-Drive Carrier
1
Turn over the hard drive and remove the four screws from the slide rails on
the hard-drive carrier. See Figure 3-3.
2
Lift the hard drive out of the hard-drive carrier.
1 release lever 2 3.5-inch hard-drive blank
3 2.5-inch hard-drive blank
2
1
3
book.book Page 52 Tuesday, February 26, 2013 11:33 AM