Filter
Top Products
Installing System Components 77
Mezzanine Card (10 GbE LAN)
Removing the Mezzanine Card (10 GbE LAN)
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1
Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2
Open the system. See "Opening the System" on page 55.
3
Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 56.
4
Remove the riser card assembly. See "Removing the Expansion-Card Riser"
on page 69.
5
Remove the three spacer pins on the mezzanine card.
6
Remove the single screw securing the card and remove the card.
SeeFigure3-15.
7
If you are not installing another mezzanine card, install the
mezzanine-card cover and secure with two screws. See Figure 3-16.
book.book Page 77 Tuesday, February 26, 2013 11:33 AM