Filter
Top Products
Installing System Components 81
Figure 3-17. Removing and Installing the Non-Redundant Power Supply
Installing the Non-Redundant Power Supply
1
Insert the replacement power supply and the securing bracket firmly into
the bay. See Figure 3-17.
2
Replace the two screws at the back.
3
Replace the four screws securing the bracket.
4
Replace the cables connecting the power supply to the system board and
backplane. See Figure 5-2, Figure 5-4, and Figure 5-6.
5
Replace the system cover. See "Closing the System" on page 56.
6
Connect the power cable to the power supply and plug the cable into a
power outlet.
7
Reconnect your system and peripherals to their electrical outlets, and turn
on the system.
1 power supply 2 screws (6)
3 bracket
2
3
1
book.book Page 81 Tuesday, February 26, 2013 11:33 AM