Filter
Top Products
58 Troubleshooting
You are prompted
to configure one
network instead of
two during MSCS
installation.
The TCP/IP
configuration
is incorrect.
The node-to-node network and public
network must be assigned static
IP addresses on different subnets.
For more information about assigning
the network IPs, see "Assigning Static
IP Addresses to Cluster Resources and
Components" of Dell Failover Clusters
with Microsoft Windows Server 2003
Installation and Troubleshooting Guide
or Dell Failover Clusters with Microsoft
Windows Server 2008 Installation and
Troubleshooting Guide.
The private
(point-to-point)
network is
disconnected.
Ensure that all systems are powered on
so that the NICs in the private network
are available.
Using Microsoft
Windows NT
®
4.0
to remotely
administer a
Windows
Server 2003
cluster generates
error messages.
Some resources in
Windows Server 2003
are not supported in
Windows NT 4.0.
It is strongly recommended that you
use Microsoft Windows XP
Professional or Windows Server 2003
for remote administration of a cluster
running Windows Server 2003.
Table A-1. General Cluster Troubleshooting (continued)
Problem Probable Cause Corrective Action