Filter
Top Products
Installing System Components 113
Figure 3-16. Removing and Installing a Fan
Installing a Cooling Fan
1
Ensure that the fan is oriented correctly.
Orient the fan module so that the side with the power cable faces toward the
back of the system.
2
Lower the fan into the fan assembly until the fan is fully seated.
See Figure 3-16.
3
Connect the fan’s power cable to the power connector on the system board.
4
Replace the cooling shroud or power distribution board shroud as applicable.
See "Installing the Cooling Shroud" on page 102.
1 fan 2 power cable
1
2
R310HOM.book Page 113 Thursday, March 4, 2010 1:03 AM