Dell H810 Server User Manual


 
36 Deploying the PERC Card
Removing the PERC Controller
1
Perform a controlled shutdown of the system and attached peripherals.
2
Disconnect the system from the electrical outlet and remove the system
cover.
3
Remove the storage controller from the PCIe slot of the system.
See Figure 3-1, Figure 3-2, or Figure 3-3 as relevant to the type of PERC
controller that you have.
Installing the PERC Controller
1
Perform a controlled shutdown of the system and attached peripherals.
2
Disconnect the system from the electrical outlet and remove the system
cover.
3
Install the storage controller in the appropriate controller slot and connect
all the cables to the storage controller.
See Figure 3-1, Figure 3-2, or Figure 3-3 as relevant to the type of PERC
controller that you have.
4
Replace the system cover.
5
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.