Filter
Top Products
Table 2. Memory Configurations — Two Processors
System Capacity (in
GB)
DIMM Size (in
GB)
Number of
DIMMs
Organization and
Speed
DIMM Slot Population
4 2 2
1R x8, 1333 MT/s
1R x8, 1600 MT/s
A1, B1
8 2 4
1R x8, 1333 MT/s
1R x8, 1600 MT/s
A1, A2, B1, B2
12 2 6
1R x8, 1333 MT/s
1R x8, 1600 MT/s
A1, A2, A3, B1, B2, B3
24 4 6
2R x8, 1333 MT/s
2R x8, 1600 MT/s
A1, A2, A3, B1, B2, B3
48 8 6
2R x4, 1333 MT/s
2R x4, 1600 MT/s
A1, A2, A3, B1, B2, B3
96 16 6
2R x4, 1333 MT/s
2R x4, 1600 MT/s
A1, A2, A3, B1, B2, B3
128 16 8
2R x4, 1333 MT/s
2R x4, 1600 MT/s
A1, A2, A3, A4, B1, B2, B3, B4
160 16 10
2R x4, 1333 MT/s
2R x4, 1600 MT/s
A1, A2, A3, A4, A5, B1, B2, B3,
B4, B5
192 16 12
2R x4, 1333 MT/s
2R x4, 1600 MT/s
A1, A2, A3, A4, A5, A6, B1, B2,
B3, B4, B5, B6
256 32 8
4R x4, 1333 MT/s
A1, A2, A3, A4, B1, B2, B3, B4
384 32 12
4R x4, 1333 MT/s
A1, A2, A3, A4, A5, A6, B1, B2,
B3, B4, B5, B6
Removing Memory Modules
WARNING: The DIMMs are hot to touch for some time after the blade has been powered down. Allow time for the
DIMMs to cool before handling them. Handle the DIMMs by the card edges and avoid touching the DIMM
components.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
CAUTION: To ensure proper system cooling, memory-module blanks must be installed in any memory socket that is
not occupied. Remove memory-module blanks only if you intend to install memory modules in those sockets.
CAUTION: If you are permanently removing a processor, you must install a socket protective cap and a processor/
DIMM blank in the vacant socket to ensure proper system cooling. The processor/DIMM blank covers the vacant
sockets for the DIMMs and the processor.
1. Remove the blade from the enclosure.
2. Open the blade.
3. Remove the cooling shroud.
4. Locate the memory module socket(s).
34