Filter
Top Products
Configuring Switching Information 291
The Protected Port Configuration page contains the following fields:
•
Port
— Specifies the Unit and Port for which port parameters are defined.
•
Protected Group ID
— Drop-down menu used to assign a port to Group 0, 1, or 2.
•
Remove Group Name
— Check this box to disassociate the selected port from the protected group.
Displaying the Protected Port Table
1.
Open the
Protected Port Configuration
page.
2.
Click
Show All
.
The
Protected Ports Summary
table displays.
Figure 7-23. Protected Port Summary Table
3.
Select the
Remove
check box and click
Apply Changes
to disassociate a port from a protected group.
4.
Use the
Unit
drop-down menu to view the
Protected Port Summary
table for other units in the stack,
if they exist.
Adding Protected Port Groups
1.
Open the
Protected Port Configuration
page.
2.
Click
Add
.
The
Add Protected Group
displays.