256 Management: Installing Array Components
Installing the RAID Controller Module Backup Battery Unit
CAUTION: Many repairs may only be done by a certified service technician. You must
only perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Read and follow the safety instructions that came with the product.
1
Align the backup battery unit with the slots on the RAID controller module.
2
Slide the backup battery unit toward the connector on the RAID
controller module.
3
Tighten the screw that secures the backup battery unit to the RAID
controller module.
4
Close the RAID controller module. See "Closing the RAID Controller
Module" on page 254.
5
Replace the RAID controller module. See "Installing a RAID Controller
Module" on page 252.
6
Connect all the cables to the array.
7
Turn on the array and the host server.
book.book Page 256 Tuesday, June 18, 2013 3:03 PM