Filter
Top Products
Removing and Installing Parts 93
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a
surface, such as a foam pad, that will sufficiently cushion it.
1
If you are replacing a hard drive that contains data you want to keep, back up your files before
you begin this procedure.
2
Follow the procedures in "Before You Begin" on page 63.
3
Remove the computer cover (see page 68).
Removing a Hard Drive
1
Disconnect the power and hard drive cables from the drive.
2
Press in on the tabs on each side of the drive and slide the drive up and out.
hard drive cable
power cable
tabs (2)
hard drive