Filter
Top Products
4
General
Safety Precautions
Do not open the housing. Unauthorised opening of the housing and improper repairs
can endanger the user. In addition, the warranty is invalidated.
Do not continue using damaged or defective plugs or AC adapters with defective
housings as these could cause electric shocks. Replace these components immedi-
ately with spare parts made by the same manufacturer.
Only equipment supplying safety extra low voltage (SELV) and/or complying with
standard ETS 300 047 may be connected to the Eumex 704PC LAN. Equipment
operated in accordance with its purpose complies with this regulation.
Do not allow fluids to penetrate inside the Eumex 704PC LAN, as this could result in
short circuits or electric shocks.
Do not install the Eumex 704PC LAN during a thunderstorm, or attach or remove
cables, as this could lead to an electric shock.
The Eumex 704PC LAN is designed for indoor operation only. Lay the cables so that
they cannot be walked on or tripped over.
Do not connect any devices that use the a/b lines for earthing to the analogue ports
(TAE sockets, plug-in terminals). The a/b lines must not be connected to earth, as this
could damage the device.
Power Failure
Data backup: in the case of a power failure, all the data in the memory (program and
user data) is retained without any changes. Merely the date and time are reset to their
default settings when power is restored. The internal clock is automatically set to the
correct time when the next charged call is made.
All callbacks are deleted.
You cannot telephone during a power failure.