Filter
Top Products
28
Staying in Touch
Call Forwarding
You can forward calls from an internal to an external terminal, or from one internal to
another internal terminal. Depending on the configuration, the call is forwarded in the
Eumex 704PC LAN or in the exchange (where a charge is incurred). In order to use
internal call forwarding, the "Call forwarding in the Eumex 704PC LAN" function must
be activated in the configuration mode (see p. 50).
Call forwarding is configured for the connection and its MSNs. For this reason, your
MSNs must be saved and assigned before you can use call forwarding (see the sec-
tion entitled "Storing Telephone Numbers (MSNs)" on p. 36).
There are three types of call forwarding:
"Immediately": incoming calls are forwarded without being signalled on the terminal
that was originally dialled.
"After a set time": calls are signalled first on the terminal that was dialled, and after a
certain period, are forwarded to the specified destination. The period is set to approx.
20 seconds.
"On busy": if the terminal is busy, the call is forwarded to the other specified destina-
tion.
If you hear a special dialling tone instead of the normal one, it means that immediate
call forwarding is active in the exchange.
Note
In the case of immediate call forwarding to the T-NetBox, the Eumex 704PC LAN
does not indicate a message waiting.
If "Call forwarding in the exchange" is active, internal calls cannot be forwarded.
Lift the handset.
Press the star key.
Select the code digit for the type of call forwarding you want to activate:
Activating Call Forwarding
b
*
t