Filter
Top Products
18
Telephoning
Accepting Calls
In order for you to be able to use all the features provided by your telecommunica-
tions system, the terminals must be set to DTMF dialling with a flash function. Termi-
nals with pulse dialling cannot perform functions requiring the R-key, the star or the
hash keys.
Your telephone rings: internal or external call. Please see the table in the Appendix for
the different ringer cadences.
Lift the handset.
Have your internal or external conversation.
Replace the handset to end the call.
Automatic and Manual External Line Seizure
You can configure your Eumex 704PC LAN so that when you lift the handset, an
external line is automatically seized, or so that you have to select the code digit 0 first
to seize the line manually.
Automatic seizure (the default setting on delivery): when you pick up the handset,
you hear the external dialling tone and can dial an external number immediately. If
you want to make an internal call, you press the R-key. You then hear an internal
dialling tone and can dial an internal number (11 - 14).
If the system is set to automatic external line seizure, you cannot dial internal num-
bers using analogue terminals with pulse dialling.
Manual seizure: when you pick up the handset, you hear an internal dialling tone
and can dial an internal number immediately. If you want to make an external call, you
dial 0. This seizes an external line, and you hear an external dialling tone. You can
then dial an external number.
Please note: avoid using DTMF dialling (e.g. with a multi-frequency transmitter)
to establish a connection on a terminal with pulse dialling. Your terminal will oth-
erwise be blocked for further dialling and will have to be released again by
dialling any digit other than 1.
g
b
c
d
r
0