Filter
Top Products
Chapter 2: Installation Procedure
Chapter 2: Installation Procedure
Before you start using IP Camera, you will need to set-up both the hardware and
software. The following is a flow chart on the installation procedure:
1
Connect IP Camera,
USB Camera and the Network cable
(Chapter 3)
2
Connect Network cable to ROUTER
/ HUB / xDSL modem
3
Install Utility (Chapter 4) and
MultiMonitor (Chapter 6)
4
Use Internet Explorer (>5.0) to
access IP Camera Web Manager
(Chapter 5).
5
IP Camera set-up completed
Fig.6. IP Camera installation flowchart
iCAMView user manual -4-