Filter
Top Products
137
Dialogic
®
DSI SS7MD Programmer’s Manual Issue 3
7.4.1 ATM_CONFIG – Configure the ATM Module
Synopsis
Global configuration of the ATM Module.
Syntax
ATM_CONFIG <options> <num_streams>
Example
ATM_CONFIG 0x0000 4
Parameters
The ATM_CONFIG command includes the following parameters:
• <options>
A 16-bit value containing additional run-time options. The bit significance is as follows:
— Bit 0 - Use ATM Forum Idle cell format rather than ITU.
• <num_streams>
The maximum number of cell streams this module will be asked to simultaneously support. For an IMA
bundle, each TDM stream within the bundle will be counted as separate.