43
Dialogic
®
DSI SS7MD Programmer’s Manual Issue 3
Chapter 5: Program Execution
This chapter describes how to start the software and execute programs. It assumes that:
• The software has already been installed. Refer to Chapter 3, “Installation”.
• The system.txt configuration file has been modified correctly. Refer to Section 4.4, “System Configuration”
on page 29.
• The config.txt protocol configuration file has been modified correctly. Refer to Section 4.5, “Protocol
Configuration” on page 32.
It contains the following sections:
• Program Execution Overview
• Program Execution Under Linux and Solaris