Filter
Top Products
18-2 Symptom: Digi One/PortServer TS 2/4 Does Not Boot
Symptom: Digi One/PortServer TS 2/4 Does Not Boot
Introduction
Use the information provided in this discussion when Digi One/PortServer TS 2/4 will not complete
the boot cycle.
Procedures
Things to Try See ...
Check for hardware problems.
• "Running Digi One/PortServer TS 2/4
Customer Diagnostics" on page 18-4
• "Key to Interpreting Digi One/PortServer
TS 2/4 LEDs" on page 18-5
Check for TFTP problems if Digi
One/PortServer TS 2/4 is booting
from a TFTP host.
• "Verifying TFTP on a UNIX System" on
page 18-5
• "Troubleshooting TFTP Problems" on
page 18-5
Resetting the device to configura-
tion defaults.
"Resetting Digi One/PortServer TS 2/4 Con-
figuration to Defaults" on page 18-6
If you cannot resolve the problem,
contact Digi.
"Digi Contact Information" on page 18-11