D-Link 2000 Server User Manual


  Open as PDF
of 265
 
6D-Link ShareCenter DNS-320L User Manual
Section 1 - Product Overview
Checking the Hardware Requirements
To use your DNS-320L, you will need at least one hard drive. If you plan to use RAID 1, which protects your data against one
hard drive failure, you will need two hard drives.
This section will help you:
•Selecttheharddrives
•Determineharddiskspaceyouwillneed
•Ensureyourdataisprotected
•Understandthebasicrequirementsforarouterorswitch
Selecting Hard Drives:
You can use hard drives from any manufacturer and with any capacity with your DNS-320L. The D-Link ShareCenter supports
standard3.5”internalSATAdrives.Ifyouareunsure,askyouradministratororharddriveretailer/manufacturertoverifythat
your hard drives meet this standard
*Warning - Any pre-existing data on the drives will be erased during installation.
Determining How Much Hard Drive Space you Need:
In order to protect your data from hard drive failure, your DNS-320L requires more space than what you will use for your data,
sometimes more than double the amount of space required.
Using a Router or Switch:
If you are connecting your ShareCenter to a router or switch, your router or switch needs to support Gigabit Ethernet
(1000Mbit/s) for maximum performance. The ShareCenter will auto-negotiate the highest connection speed available to your
router or switch.
Using an Uninterrupted Power Supply (UPS):
We highly recommend that you use your ShareCenter in conjunction with an uninterrupted power supply (UPS), which will
protect against sudden loss in power and power surges.
 previous next