D-Link 2000 Server User Manual


  Open as PDF
of 265
 
12D-Link ShareCenter DNS-320L User Manual
Section 2 - Getting Started
Step 3 - Attach the hard drive brackets
to the sides of your hard drives with the
included screws. Ensure the brackets are
aligned so that when the hard drive is
inserted, the arrow on the bracket points
to the front of the ShareCenter.
Step 4 -Insert uptotwo3.5”SATAhard
drives into the drive bays.
Note: Make sure to align the drive connector to the SATA connector at the back edge inside the drive bay of the ShareCenter.
Gentlypushthedriveinuntilitconnects.Whenadriveisinsertedproperly,youwillfeelit“set”intotheconnector.Somehard
drives that are thin or oddly shaped may need to be inserted carefully into position. If a drive is not properly set in place, the
hard drive LED will not illuminate after powering on the device.
 previous next