Filter
Top Products
219D-Link ShareCenter DNS-320L User Manual
Section 4 - Conguration
1. Connect a USB storage device to the USB port on the back panel
of the device. The LED will blink then become solid once it is ready
for backup, if USB Backups has been enabled in the USB backup
settings.
2. Press the USB button to start the backup process. The LED starts to
blink to display that the backup is in the process. The ShareCenter
will copy or sync all the les from the source folder to the destination
folder.
Please Note: No warning message will appear to indicate that
all data on the destination folder will be deleted automatically if
you’ve selected Synchronize in the USB Backup settings.
USB Backup Process