9D-Link ShareCenter DNS-320L User Manual
Section 1 - Product Overview
Rear Panel (Connections)
COMPONENT DESCRIPTION
Cooling Fan
The cooling fan is used to cool the hard drives and features speed control. When the unit is rst powered on, the
fans rotate at a low speed and later rotate at a high speed when the temperature rises above 49 °C.
Gigabit Ethernet Ports
Use the Gigabit Ethernet port to connect the ShareCenter to the local network. The port is equipped with 2 LEDs. The
LED on the right will illuminate solid green for a good connection and will blink during data transmission. If this LED
is o, check the connection/cable to the device you are connecting to. The LED on the left will light solid for a Gigabit
connection and will remain o when connected to a 10/100 device.
Power Receptacle
Connect the supplied power cord to the receptacle.
USB Port A single USB 2.0 (Type A) connector. The USB Host port is for Print Servers, USB memory disks, or USB UPS monitoring.
Latch Press the latch to release the Top Panel and insert or remove the hard drives
Security Lock Prevent theft by tying a lock to the ShareCenter NAS and a desk
Top Panel
Latch
Cooling Fan
Power Receptacle
Gigabit Ethernet Port
USB Port
Security Lock