Filter
Top Products
DGS-3024 Gigabit Ethernet Switch Manual
SSL function, which are all enabled by default. To utilize a particular ciphersuite, disable the unwanted ciphersuites, leaving
the desired one for authentication.
When the SSL function has been enabled, the web will become disabled. To manage the Switch through the web-based
management while utilizing the SSL function, the web browser must support SSL encryption and the header of the URL
must begin with https://. (Ex. https://10.90.90.90) Any other method will result in an error and no access can be authorized
for the web-based management.
To view the following window, click Security > Secure Socket Layer (SSL) > Configuration:
Figure 8- 3. SSL Configuration window
To set up the SSL function on the Switch, configure the following parameters and click Apply.
Parameter Description
Status
Use the pull-down menu to enable or disable the SSL status on the Switch. The default
is Disabled.
RSA with RC4 128
MD5
This ciphersuite combines the RSA key exchange, stream cipher RC4 encryption with
128-bit keys and the MD5 Hash Algorithm. Use the pull-down menu to enable or
disable this ciphersuite. This field is Enabled by default.
RSA with 3DES EDE
CBC SHA
This ciphersuite combines the RSA key exchange, CBC Block Cipher 3DES_EDE
encryption and the SHA Hash Algorithm. Use the pull-down menu to enable or disable
this ciphersuite. This field is Enabled by default.
DHS DSS with 3DES
EDE CBC SHA
This ciphersuite combines the DSA Diffie Hellman key exchange, CBC Block Cipher
3DES_EDE encryption and SHA Hash Algorithm. Use the pull-down menu to enable or
disable this ciphersuite. This field is Enabled by default.
RSA EXPORT with
RC4 40 MD5
This ciphersuite combines the RSA Export key exchange and stream cipher RC4
encryption with 40-bit keys. Use the pull-down menu to enable or disable this
ciphersuite. This field is Enabled by default.
NOTE: Certain implementations concerning the function and configuration
of SSL are not available on the web-based management of this Switch and
need to be configured using the command line interface. For more
information on SSL and its functions, see the DGS-3024 Command Line
Interface Reference Manual, located on the documentation CD of this
product.
88