Filter
Top Products
DGS-3024 Gigabit Ethernet Switch Manual
Static ARP Settings
The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table
allows network managers to view, define, modify and delete ARP information for specific devices.
Static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and is used to
translate IP address to MAC addresses.
To open the Static ARP Table open the Configuration folder and click on the Static ARP Settings link.
Figure 7- 61. Static ARP Settings window
To add a new entry, click the Add button, revealing the following window to configure:
Figure 7- 62. Static ARP Table – Add a New Entry window
The following fields can be set:
Parameter Description
IP Address
The IP address of the ARP entry.
MAC Address
The MAC address of the ARP entry.
After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To
completely clear the Static ARP Settings, click the Clear All button.
85