Filter
Top Products
DGS-3024 Gigabit Ethernet Switch Manual
Figure 10- 7. Tx Packets Analysis window (table for Bytes and Packets)
The following fields may be set or viewed:
Parameter Description
Time Interval
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Record Number
Select the number of times the Switch will be polled between 20 and 200. The default
value is 20.
Bytes
Counts the number of bytes successfully sent from the port.
Packets
Counts the number of packets successfully sent on the port.
Show/Hide
Check whether or not to display Bytes and Packets.
Clear
Clicking this button clears all statistics counters on this window.
View Table Clicking this button instructs the Switch to display a table rather than a line graph.
View Line Chart Clicking this button instructs the Switch to display a line graph rather than a table.
Errors
The Web Manager allows port error statistics compiled by the Switch's management agent to be viewed as either a line graph
or a table. Four windows are offered.
122