Filter
Top Products
DGS-3024 Gigabit Ethernet Switch Manual
7
Configuration
The first Web Manager main folder is Configuration and includes the following windows and sub-folders: IP Address,
Switch Information, Advanced Settings, Port Configuration, Port Mirroring, Link Aggregation, IGMP Snooping,
Spanning Tree, Forwarding & Filtering, VLANs, SNTP Settings, QoS, MAC Notification, System Log Server, Port
Access Entity, and Static ARP Settings, as well as secondary windows.
IP Address
Figure 7- 1. Switch IP Settings window
This window is used to determine whether the Switch should get its IP Address settings from the user (Manual), a BOOTP
server, or a DHCP server. If you are not using either BOOTP or DHCP, enter the IP Address, Subnet Mask, and Default
Gateway of the Switch. If you enable BOOTP, you do not need to configure any IP parameters because a BOOTP server
automatically assigns IP configuration parameters to the Switch. If you enable DHCP, a Dynamic Host Configuration
Protocol request will be sent when the Switch is powered up. Once you have selected a setting under Get IP From, click
Apply to activate the new settings.
The information is described as follows:
Parameter Description
Get IP From
There are three choices for how the Switch receives its IP Address settings: Manual,
BOOTP, and DHCP.
IP Address
The host address for the device on the TCP/IP network.
Subnet Mask
The address mask that controls subnetting on your TCP/IP network.
Default Gateway
The IP address of the device—usually a router—that handles connections to other
subnets and/or other TCP/IP networks.
VID
The VLAN ID number.
22