Filter
Top Products
41
Using the DCS-5300 with an Internet browser
(continued)
Configuration > Advanced >Network (continued)
Can be set to other than the default port 80. When
the administrator changes the HTTP port of the
DCS-5300 (which has an IP address of
192.168.0.146) from 80 to 8080, users must type
http://192.168.0.100:8080 in the Web browser
bar.
HTTP Port-
HTTP Settings
Streaming Settings
Control channel port - Can be set to other than the default port 5001 to
correspond with the port opened by the firewall.
.
2nd FTP user name - Granted user name on the backup FTP server.
2nd FTP password - Granted password on the backup FTP server.
2nd FTP server - The domain name or IP address of the external
FTP server. Note that the 2nd FTP server will only
be used if the 1st FTP is unavailable. If image
upload to the 1st FTP is successful, no attempts
will be made to connect to the 2nd FTP server.
2nd FTP remote folder - Granted folder on the backup FTP server.
Mode - Passive mode setting for the backup FTP server.
Secondary FTP passive
If the DCS-5300 is located inside a network that
is protected by a firewall, a data connection for
FTP may be prohibited. Passive mode FTP can
bypass this rule and allow the uploading of
snapshots. If the passive mode is selected, the
DCS-5300 can automatically attempt to upload
in active mode if the external FTP server does
not support passive mode.
Primary FTP Passive
Mode-