Filter
Top Products
8
Connections (continued)
Included with the DCS-5300 is an infrared remote control. You have the option
of controlling the camera via the Pan/Tilt Controls using the IP surveillance
software, Internet Explorer, or via the infrared remote. To use the remote, make
sure that IR Control is enabled on the Camera Control page in the Configuration
Menu under Advanced. Please refer to the section titled “Using the DCS-
5300 with an Internet Browser” in this manual for more information.
Infrared Remote Control
Stop
Auto-Patrol
Auto-Pan
Center
Home
Arrows
Arrows -
Use the Up, Down, Left and Right arrows to tilt/
navigate the camera lens.
Home- Returns the camera lens to the set home position.
Auto-Patrol-
Enables the Auto-Patrol function.
Auto-Pan-
Center-
Centers the camera lens.
Pans the camera one full cycle.
Stop-
Stops the movement of the camera during pan.