Filter
Top Products
5 Configuration D-Link Web Smart Switch User Manual
Figure 5.44 – L2 Functions > Multicast > IGMP Snooping VLAN Settings
To view the Multicast Entry Table for a given VLAN, press the View button.
Figure 5.45 – L2 Functions > Multicast > IGMP Multicast Entry Table
L2 Functions > Multicast > Multicast Forwarding
Forwarding static multicast forwarding
ble. To implement the Multicast Forwarding Settings, input VID, Multicast MAC Address and port settings,
The Multicast
ta
page displays all of the entries made into the Switch’s
then click Add.
Figure 5.46 – L2 Functions > Multicast > Multicast Forwarding
VID: The VLAN ID of the VLAN to which the corresponding MAC address belongs.
t MAC Address: T st packets. This must be a
ulticast MAC address.
ulticast group and ports
e port will not be a member of the Static Multicast Group.
Multicas
m
he MAC address of the static source of multica
Port Settings: Allows the selection of ports that will be members of the static m
either that are forbidden from joining dynamically, or that can join the multicast group dynamically, using
GMRP.
Member - The port is a static member of the multicast group.
None - No restrictions on the port dynamically joining the multicast group. When None is chosen,
th
42