Filter
Top Products
6 Command Line Interface D-Link Web Smart Switch User Manual
show switch
Purpose To display information about the Switch.
Syntax
show switch
Description The show switch command displays the status of the switch.
Parameters None.
Restrictions None.
Example usage:
To display the switch information:
DGS-1210-52> show switch
System Name :
System Contact :
System Location :
System up time : 0 days, 6 hrs, 32 min, 17 secs
System Time : 01/01/2009 06:32:19
System hardware version : A1
System firmware version : 1.00.001
System boot version : 1.00.000
System Protocol version : 2.001.004
System serial number : 1MB1733K0000A
MAC Address : 00-18-E7-48-85-50
DGS-1210-52>
config account admin password
Purpose To display the configuration of an IP interface on the Switch.
Syntax
config account admin password
Description The config account admin password command sets the
administrator password.
Parameters <passwd> − The new password of the administrator.
Restrictions None.
Example usage:
To configure the account admin password:
DGS-1210-52> config account admin password 1234
DGS-1210-52>
save
Purpose To save changes in the Switch’s configuration to non-volatile
RAM.
Syntax
save
82