Filter
Top Products
5 Configuration D-Link Web Smart Switch User Manual
Click Ap
ply to make it effective.
NOTE: The switch begins the access rule with the
smallest access ID, so be careful in assigning the
ID for the expected results.
To modify an existing rule, please click on the Access ID hyperlink.
Figure 5.84 – ACL > Access Profile List > Access Rule List
ACL > ACL Finder
This page is used to help find a previously configured ACL entry. To search for an entry, enter the profile ID
from the drop-down menu, select a port that you wish to view, define the state and click Search. The table
on the lower half of the screen will display the entries. To delete an entry click the corresponding Delete
button.
Figure 5.85 – ACL > ACL Finder
PoE > PoE Global Settings (DGS-1210-28P only)
This page will display the PoE status including System Budget Power, Support Total Power, Remainder
Power, and The ratio of system power supply.
Figure 5.86 – PoE > PoE Global Setting
System Power Threshold: Manually configure the system power budget (7.1 ~ 185.0 W)
Power Shut Off Sequence: Defines the method used to deny power to a port once the threshold is reached.
The possible fields are:
Deny next port: When the power budget is exceeded, the next port attempting to power up is
denied, regardless of the port priority.
Deny low priority port: The port with the lower priority will be shut down to allow the higher priority
port to power up.
Click Apply to make the configurations take effects.
System Power Status: Displays the system power status of device.
Total PoE Power Budget: Displays the total PoE power budget of this switch.
6
6
5
5