Filter
Top Products
5 Configuration D-Link Web Smart Switch User Manual
Click Ap
ply to implement changes made.
When selecting Local for the clock source, users can select from one of two options:
anually set current time: Users input the system time manually. M
Set time from PC: The system time will be synchronized from the local computer.
L2 Functions > SNTP > TimeZone Settings
The TimeZone Setting Page is used to configure time zones and Daylight Savings time settings for SNTP.
Figure 5.49 – L2 Functions > SNTP > TimeZone Settings
Daylight Saving Time State: E
aylight Saving Time Offset: Use this drop-down menu to specify the amount of time that will constitute
rom: Month / Day: Enter the month DST and date DST will start on, each year.
ay that DST will start on, each year.
tings
nable or disable the DST Settings.
D
your local DST offset - 30, 60, 90, or 120 minutes.
Time Zone Offset GMT +/- HH:MM: Use these drop-down menus to specify your local time zone's offset
from Greenwich Mean Time (GMT.)
Daylight Saving Time Settings:
F
From: HH:MM: Enter the time of d
To: Month / Day: Enter the month DST and date DST will end on, each year.
To: HH:MM: Enter the time of day that DST will end on, each year.
Click Apply to implement changes made.
L2 Functions > LLDP > LLDP Global Set
LDP (Link Layer Discovery Protocol) provides IEEE 802.1AB standards-based method for switches to
ll as to learn about neighbor LLDP devices. SNMP utilities
L
advertise themselves to neighbor devices, as we
can learn the network topology by obtaining the MIB information in each LLDP device. The LLDP function is
enabled by default.
Figure 5.50 – L2 Functions > LLDP > LLDP Global Settings
44