Filter
Top Products
21
Basic Operation
Message disappears after 4 seconds.
Press the P-TIMER button on the remote control. The timer display
“00 : 00” appears on the screen and the timer starts to count time (00
: 00 ~ 59 : 59).
To stop P-Timer display, press the P-TIMER button. And then, press
the P-TIMER button again to cancel P-Timer function.
1
2
Press the MENU button to display the On-Screen Menu. Press
the Point
78buttons to move the red frame pointer to Sound
Menu icon.
Volume
Press the VOLUME +/– buttons on the remote control or on the top
control to adjust volume. The volume dialog box appears on the
screen for a few seconds.
The VOLUME + button to increase volume, and the VOLUME –
button for decreasing.
Mute
Press the MUTE button on the remote control to cut off sound. To
restore sound to its previous level, press the MUTE button again or
press Volume +/–.
To increase volume, Press the Point 8 button, and Press the Point 7
button to decrease volume.
Press the Point 78 buttons to mute the sound. Dialog box display is
changed to “On” and sound is muted. To restore sound to its
previous level, press the Point
78buttons again.
Press the Point d button to move the red frame pointer to the
item that you want to select, and then press the SELECT button.
Indicates approximate
level of volume.
Close Sound Menu.
Direct Operation
Menu Operation
Volume
Mute
Indicates approximate
level of volume.
The display disappears after 4 seconds.
SOUND MENU
Sound Menu icon
Sound Adjustment
P-Timer Function
No Show Function
Press the MUTE button to set
Mute function "On" or "Off".
Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and set
as “User” in the Logo item in the Setting menu ( ☞ P36 ), the screen
changes each time you press the NO SHOW button as follows :
black out ➜ the captured image ➜ normal ➜
......
Basic Operation