Filter
Top Products
25
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In this
case, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-
synchronized picture, a non-centered picture or a skewed picture.
The Manual PC Adjustment function allows you to precisely adjust several parameters to match those special signal
formats. You can store those adjusted parameters in the 5 independent memory areas, enabling you to call up whenever
you need.
Press the MENU button to display the On-Screen Menu. Press
the Point
7 8 buttons to move the red frame pointer to the PC
Adjust Menu icon.
1
2
Press the Point d button to move the red frame pointer to the
item that you want to adjust and then press the SELECT button
to display the adjustment dialog box. Press the Point
7 8
buttons to adjust the value.
Move the red frame pointer to the item
and press the SELECT button.
PC ADJUST MENU
PC Adjust Menu icon
Adjust an image as necessary to eliminate flicker from the display.
Press the Point
7 8 buttons to adjust the value.(From 0 to 31.)
Fine sync
Adjust the number of total dots in one horizontal period. Press the
Point
7 8 buttons and adjust number to match your PC image.
Total dots
Adjust horizontal picture position. Press the Point 7 8 buttons to
adjust the position.
Horizontal
Adjust vertical picture position. Press the Point 7 8 buttons to
adjust the position.
Vertical
Press the SELECT button to show the information of computer
selected.
Current mode
Adjust clamp level. When the image has dark bars, try this
adjustment.
Clamp
Press the SELECT button at this
icon to adjust “Clamp,” “Display
area (H/V)” or set “Full screen.”
Press the Point 7 8 buttons
to adjust the value.
Shows status
(Stored / Free) of the
selected Mode.
Selected Mode
Press the SELECT button at
the Current Mode icon to
show the information of the
computer connected.
Current mode
Computer Input